There are a number of problems that take place with a Eumig projector. These are typically caused by a burnt-out projection lamp, a dead pilot light-bulb or a worn drive belt. Other issues cause images not to appear over the projector. Instructions cine projector EUMIG MARK 610D 607D dual 8 silent CD/Email. Shipping: + $4.01 shipping. Kodak Cine Showtime Model A20 Projector Instruction Manual. Type of Manual: Eumig P8 M 8mm Film Projector - Instruction Manual - PDF File.
- Eumig P8 Dual Manual Instructions
- Eumig P8 Dual Manual Pdf
- Eumig P8 Dual Manual Download
- Eumig P8 Dual Manual User
Eumig Mark S 810 D High Quality Sound Projector
A dual gauge sound projector. Plays Super8/Single8 and standard8.
Lens: Vario Eupronet 1,3/15-30 mm.May also be equipped with some other Eupronet zoom lens.
Halogen lamp 12 V/100 W type EFP
Sound: mono ( record&playback ), fade in / fade out, sound-on-sound, mixing from external source ( microphone 0,3-150 mV, 22 kΩ; line in 50 mV - 3 V, 1 MΩ )
Amplifier 15W, option for external amplifier ( line out 0,5-1,5 V, 50 kΩ )
Eumig P8 Dual Manual Instructions
Internal loudspeaker
Option for external loudspeaker ( 4 - 8 Ω, 10W )
Auto threading
Forward/backward projection
Speeds: 18 fps and 24 fps
Reel capacity: 180m/600ft
Weight appx. ???
Accessories: Universal reel; 8mm to super8 stepper for the front arm spindle; microphone; 6 m reel of magnetic striped film; film head trimmer/clipper.
Optional accessories: Eumig Serie 600 Daylight Viewer; Eumig LS-800 loudspeaker; Universal re-recording lead ( a cord + four adapters ).
Eumig P8 Dual Manual Pdf
Eumig P8 Dual Manual Download
Comments[edit]
Changing between standard8 and S-type film formats requires changing the gate assembly and sprocket wheel set. If You are considering to buy this projector You should check that both sets are present. The second set of sprocket wheels is stored on the inner side of the removable front panel and the additional gate assembly is in a horizontal slot in the body, also under the front panel. When changing the gate assembly, the knob at the rear of the projector should be manually turned to position where the red dot is up.